Elite Lighting 4" LED Retrofit Module/ Trim

Be the first to review this product

Availability: In stock


Quick Overview

This Elite Module LED has been engineered for new construction where Title-24’s ‘No Edison Socket” mandate has been initiated. A dedicated housing installs the same as any other Elite Lighting product and features our adjustable, lockable and tiltable nail bars. The Module LED can also be installed into most 4-inch incandescent downlights by using our unique Edison adapter.
Over 416 usable lumens are directed from the luminaire to the work surface. Lighting is smooth and comfortable, all while using 75% less energy than the equivalent 50W BR20 and 25% less than the common 13W CFL. Plus the Elite Module LED features 50,000 hours life, and California Title-24 compliance.

Elite Lighting 4" LED Retrofit Module/ Trim

Double click on above image to view full picture

Zoom Out
Zoom In

More Views


Features Greater light output than an 13w CFL or a 65w BR30 while consuming less than 10w of power. Optics Anyone can mount a chip to a heat sink and make a down light. Gather the light scattered by the LED chip, shape it into a functional beam with a state of the art reflector, integrate the light through a smooth reflector to minimize brightness, then top it all off with a glare reducing cone that has a 55-degree cut-off. Now you have the Elite-engineered, superior quality, Module LEDconsuming less than 10 watts and producing over 600 lumens. Durability Die-cast aluminum housing and heat management system are engineered for extremely long life and service period. Without proper heat management, any LED luminaire will fail. Our die-cast system pulls the heat from the LED chip, allowing the continued cool operation for years. Life tests have shown the Elite Module LED light output will be maintained at 70% of initial at 50,000 hours of operation. Our superior design allows for installation in construction that requires the Elite Air-Shut? system. Our LED driver is rated for 50 to 60 Htz at 120v input, produces less than 10% THD, has a power factor between 0.90 and 1.00 and is thermal protected for additional safety. In installations requiring 277v, we offer a step-down transformer option that is field installable. Repeatable Repeatability means quality. From our chip selection process, to our driver, to the thermal management, the Elite LED Module is engineered for quality. All Elite LED luminaries are rated at 85+ CRI and 27K, 30K, 35K, 40K and 51K, as rated and tested to LM-79 and LM-80 standards by an outside laboratory, and meets the California Title-24 compliance standards. Our stringent chip specifications to accept only those chips that produce no ultra violet light and with very minimal infrared. Dimmable The Module LED lighting system is dimmable down to 15%. No extra equipment or complicated electronics are required. Simply install on the circuit using the following dimming: Lutron Maestro: MAELV-600 (or similar) Lutron Diva: DVELV-600 (or similar) Lutron Radio-Ra: RAELV-500L Smarthome Instaon: 2476D Lutron Home Works or Grafik-Eye Vantage Lighting System. Applications using three or fewer luminaires or require dimming down to 5%, or using more than one dimmer (daylight harvesting, programmed controls) require load compensating dimmers. Interchangeable The Elite Module LED system works in our dedicated (LD4IC-AT, LD4-AT, LD4R-AT) housings and our existing 4" incandescent housings (or standard B4IC-AT, B4-AT and B4R-AT) but is also suitable for using in most 4-inch recessed downlight housing. Adaptable All Elite Module LED luminaries are shipped standard with our custom engineered Edison adapter. This adapter assembly allows the luminaries to install directly into existing Elite 4" downlight housings and most other 4-inch downlight housings. Our Word The Elite Module LED is warranted for 3 years of flawless operation. As a system, we stand behind the entire Elite products from housing to bar hangers. When theModule LED is installed in retrofit applications, only the Module LED itself is warranted.

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.